Name: Phoenix QUINT-BUFFER/24DC/20 2866213 Buffer module
SKU: EMP0006512
Price: 271.4 USD
Availability: InStock

Product Details

Specification

Input voltage	24 V DC
Input voltage range	22.5 V DC … 30 V DC
Input voltage range DC	22.5 V DC … 30 V DC
Buffer period	0.2 s (20 A)
Buffer period	4 s (1 A)
Current consumption	approx. 0.1 A
	0.6 A (charging process)
	20.6 A (max.)
Reverse polarity protection	yes
Charging delay	no
Fixed backup threshold	< 22 V DC
Variable connect threshold	(U_IN – 1 V)/0.1 s
Protective circuit	Transient surge protection; Suppressor diode, 35 V DC

Efficiency	> 95 %
Nominal output voltage	24 V DC (depending on the input voltage)
Setting range of the output voltage (U_Set)	22 V DC … 28.5 V DC
Nominal output current (I_N)	20 A
Output current limit	27 A (buffer mode)
Bridging time	200 ms
Feedback voltage resistance	< 35 V DC (buffer mode)
Protection against overvoltage at the output (OVP)	< 35 V DC
Residual ripple	< 100 mV_PP (buffer mode)
Output power	480 W
Peak switching voltages nominal load	< 100 mV_PP (20 MHz)
Power dissipation	2.5 W (ready at 27 A)
Power dissipation	9.8 W (buffer mode at 27 A)
Protective circuit	Transient surge protection; Suppressor diode, 35 V DC
Connection in parallel	yes, for increasing the buffer time and for redundancy
Connection in series	yes

Mains operation
Nominal output voltage	24 V DC
Nominal output current (I_N)	20 A
Battery operation
Nominal output voltage	24 V DC
Nominal output current (I_N)	20 A
Signal: Active (high = buffer module is loaded)
Output description	Power Good
Maximum switching voltage	≤ 24 V
Output voltage	+ 24 V
Continuous load current	≤ 20 mA

Input
Connection method	Screw connection
Conductor cross section, rigid min.	0.5 mm²
Conductor cross section, rigid max.	16 mm²
Conductor cross section flexible min.	0.5 mm²
Conductor cross section flexible max.	10 mm²
Conductor cross section AWG min.	20
Conductor cross section AWG max.	6
Stripping length	10 mm
Screw thread	M4
Tightening torque, min	1.2 Nm
Tightening torque max	1.5 Nm
Output
Connection method	Screw connection
Conductor cross section, rigid min.	0.5 mm²
Conductor cross section, rigid max.	16 mm²
Conductor cross section flexible min.	0.5 mm²
Conductor cross section flexible max.	10 mm²
Conductor cross section AWG min.	20
Conductor cross section AWG max.	6
Stripping length	10 mm
Screw thread	M4
Tightening torque, min	1.2 Nm
Tightening torque max	1.5 Nm
Signal
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Screw thread	M3
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

Types of signaling	LED
Types of signaling	Active switching output
Operating voltage display	Green LED
Signal output: Active (high = buffer module is loaded)
Status display	LED “Power Good”, green
Note on status display	Buffer module is loaded: LED ON

Condition:New

Description of your requirements:

Email *